Introduction：
This product is designed according to TIA/EIA568B-2.1 and ISO/IEC11801 standard.The universal RJ45 terminal can connect it to leading end of the protected equipment conveniently.The high quality and high discharge capability electirc surge protector as well as the low capacity and ultra-fast recovery diode matrix structure can provide high energy coarse protection and low energy fine protection to data line,having favorable frequency transmission property as well as higher through flow and fast response speed,which can be used in the integrated wiring of network in office and industry as well as data communication system with similar usage,such as 1000M Ethernet,ATM,ISDN,VOIP network,POE system etc.
Model
HD-XNET-16（24）RJ45/E1000
Nominal working voltage Un
36V
Maximum continuous working voltage Uc
48V
Withstand impulse voltage Uoc
5KV
Impact current Iimp
1.5KA
Nominal discharge current In （8/20μs）
2.5KA
Maximum discharging current
Imax（8/20μs）
5KA
Voltage protection level Up
X-X
≤130V
X-G
≤600V
Response time Ta
≤1ns
Operating temperature range Tup
-40℃ 至+70℃
Protection grade
IP20
Insertion loss
0.2dB
Bandwidth fG
1000M
Sheathing material
Metal spraying
Mode of connection
series
Number of guard wire
1-8 wire
External dimension
483*94*45mm
1U network cabinets
Fixed way
Installation method：
Put an arrester in series
at the leading end of the line interface of the protected equipment.”OUT” is
equipment end and “IN” is incoming line end.Connect the arrester ground
terminal and lightning protection ground lead well (suggested earth resistance≤4Ω)
